N50 Neodymium Cylinder Magnet 1 inch x 1 inch (25mm x 25mm), 70 lbs Pull – Strong Cylindrical Rare Earth Magnet for Lifting, Holding & Workshop Use, 1 PC

Need a magnet that actually holds? This 1" x 1" N50 neodymium cylinder magnet is rated up to 70 lbs of pull force on direct flat-steel contact — enough to grip metal workpieces during assembly, mount tools on a steel cabinet, or pick up dropped hardware from tight spots on the shop floor.The cylindrical geometry matters. Equal diameter and height (both 25mm) mean the entire face engages the target surface at once, maximizing real-world holding strength. Unlike thin disc magnets or long rod magnets, this profile seats solidly and resists tipping under lateral load.Finished in triple-layer Ni-Cu-Ni plating, the surface is smooth, corrosion-resistant, and won't mar polished or coated steel under normal handling. The NdFeB core retains its magnetism permanently in normal indoor environments. Axially magnetized through the cylinder height; rated for continuous use up to 80°C (176°F).Common applications: holding welding fixtures and jigs in position; retrieving fasteners, bolts, and metal chips from floors and crevices; temporary magnetic clamping during glue-up or assembly; mounting and organizing tools on steel surfaces; sensor and proximity switch activation in laboratory or prototyping setups.A note on real-world performance: 70 lbs pull force is achievable on clean, flat steel with full face contact. Through paint, coating, or with any gap between surfaces, effective force will be lower — plan accordingly for your specific application.SAFETY: Strong pinching hazard — keep fingers clear when bringing the magnet near steel. Keep away from pacemakers and electronic devices. If swallowed, magnets may cause serious internal injury — keep away from children. Not suitable for children under 14.

• EXCEPTIONAL HOLDING STRENGTH – N50 neodymium cylinder magnet delivers up to 70 lbs of axial pull force from a compact 1" × 1" (25mm × 25mm) body — built for tool holding, parts retrieval, and fixture work
• PRECISION CYLINDRICAL FORM – Equal 1-inch diameter and height give full-face contact on flat steel surfaces, putting the full rated pull force to work in real workshop conditions rather than just under laboratory settings
• WORKSHOP AND GARAGE READY – Holds metal tools on cabinet walls, retrieves dropped bolts from tight spaces, secures workpieces during assembly, and mounts firmly to any ferrous surface in the shop, garage, or lab
• DURABLE NI-CU-NI COATING – Triple-layer nickel-copper-nickel plating resists corrosion; smooth polished face glides on steel without scratching; NdFeB rare earth core retains permanent magnetic strength under normal conditions
• N50 HIGH-PERFORMANCE GRADE – Near the top of the commercial neodymium grade range, N50 delivers meaningfully higher flux density than standard N35–N42 magnets of the same size — maximum holding force in minimum footprint